Grounded Battery Manufacturing & Clean-Room Concrete in Detroit
Battery assembly and semiconductor production floors need precision. The slab must stay flat for robotics, resist the chemistry in the process, and ground static before it damages a cell. Detroit Concrete builds ESD-bonded systems and clean-room concrete with the flatness, seamless detailing and curing discipline that actually passes certification. Free written estimate included.
Where Clean-Room and ESD Concrete Separate from Standard Floors
A battery or semiconductor facility floor is not just a surface. It is part of the production system. A static event from an ungrounded slab can destroy a cell; a rough or porous concrete surface will shed particulate into a clean room; and a wavy floor will throw off the calibration of automated assembly equipment.
Our ESD manufacturing concrete systems are grounded to a real electrical ground, tested for resistance and decay time, and bonded into the slab so the protection stays. Our cold-storage and controlled-environment floors are flat, seamless and coved to meet the protocol, not just labelled that way.
Both start with the same foundation: a mechanically prepped slab, moisture testing, and the right chemistry for the process. We build them to pass audit and stay in spec, the same rigor we bring to warehouse flooring and manufacturing concrete across Detroit.
Recent installations
Installation sequence
How We Build Battery & Clean-Room Floors in Detroit
Assess the production spec
We review the clean-room classification, ESD requirements, chemical exposure, flatness tolerance and AGV or robot path specs to engineer the right concrete system.
Prepare the slab mechanically
We grind or shot-blast the existing concrete to a clean profile, test for moisture, repair cracks or voids, and level any high spots with self-leveling concrete.
Install the system to spec
We apply the ESD bonding, grounding straps and topcoat system, or the seamless coved clean-room finish, following the manufacturer protocol and the facility's operational windows.
Test and certify
The concrete cures fully, ESD resistance is tested where required, and the floor is handed back ready for your clean-room certification or production startup.
Why precision matters
The Difference Between Spec-Built and Assumed Compliance
A floor labelled ESD or clean-room is not the same as a floor built to be ESD or clean-room. We test EV battery manufacturing flooring for grounding resistance and decay time after installation, not before. We detail clean room concrete with coved walls and seamless joints so the protocol can actually be enforced.
The difference shows up in your audit results, your static event log, your particulate counts and your robot accuracy. We build industrial concrete floors with the same engineering discipline we use for ready-mix concrete and concrete pumping work, because the foundation has to be right before the finish can work.
ESD grounding, clean-room compliance, flatness and chemical resistance in Detroit.
ESD flooring is a grounded, anti-static floor system that dissipates static. EV battery and electronics production need it because a static discharge from a normal floor can damage cells, components or trigger an event.
Yes. Clean room concrete floors are flat, seamless and coved, with the chemistry, particulate control and detailing the protocol requires, installed so the room can actually be certified.
It has to do three things at once, ground the floor electrically, resist the production chemistry, and hold a flatness tolerance so AGVs and robotics run true. A standard industrial floor does not deliver any of those by default.
Yes, where the spec requires it. The grounding is tied to a real ground and tested for the resistance and decay-time numbers in the spec, not just installed and assumed.
Yes. We phase the work around the production schedule, isolate the area, grind back to a clean profile and install the system zone by zone, so the operation keeps moving while the floor gets built right.
Client reviews
What Detroit Battery & Tech Facilities Say About Their Precision Floors
ESD floor system through the assembly cells, grounded and tested. We have not had a static event in a year and our particulate counts are inside spec every audit.
H. K.
Battery production lead
★★★★★
Coved, seamless and dead flat. The clean-room protocol actually works because the floor was built to be cleaned, not just labelled clean-room.
B. A.
Clean-room operations
★★★★★
Phased it cell by cell so production never stopped. The new floor is flat enough that our AGVs run a measurable amount faster and quieter.
S. M.
Technology facility manager
★★★★★
They asked the right questions about chemistry, flatness and grounding before they quoted. That alone separated them from the contractors who just sell coating.
T. P.
EV manufacturing engineer
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Detroit.
Share the clean-room or ESD spec, the production chemistry, the flatness tolerance and your operational windows. We will engineer the concrete system and send a written, itemised quote.
