Skip to main content
Detroit & area concrete contractor · Free written estimates
(313) 888-8371

Foundations · Installation

New Foundation Installation in Detroit for Homes & Additions

Footings and walls that hold for decades start with precision. We excavate to bearing soil, form and reinforce to the engineer's specifications, pour and cure on schedule, then waterproof before backfill. One crew handles the entire sequence from site survey through final inspection. Free written estimate before we break ground.

  • Poured to engineer specs
  • Inspected at every stage
  • Waterproofing included

What sits beneath

Precision in Foundation Installation Prevents Years of Trouble

A foundation that settles unevenly, cracks early, or leaks will cost far more to fix than it cost to build right the first time. The slab and walls are hidden once backfill goes in, so the work must be flawless before that moment.

We start by confirming the bearing soil against the geotechnical report, then stake the footing and wall positions to the engineer's layout. Footings are excavated to depth, formed, reinforced with rebar tied to spec, and poured in one continuous placement. Walls go up on the cured footing, formed plumb and true, with embeds for utilities set before the pour. Every stage is documented and ready for inspection before the next phase begins.

For additions, the new slab must tie or isolate from the existing footing exactly as the engineer designed, so settlement is uniform and no cracks form at the joint. This detail work is part of every concrete foundation we install. The same rigor applies to our basement floor pours and all residential concrete work.

Recent work
formed foundation under construction at a Detroit new build
foundation footing pour with a skid steer at a Detroit site

The sequence

Step-by-Step Foundation Installation Process in Detroit

  1. Site survey and layout

    We review the engineer's drawings on-site, confirm the bearing soil depth with the geotechnical report, and stake the footing and wall centerlines to the exact positions shown on the plans.

  2. Excavate and inspect

    Footings are dug to the specified depth, the bearing soil is exposed and inspected for consistency, and any soft spots or over-excavation are corrected before forming starts.

  3. Form, reinforce, and pour

    Footing forms are set, rebar is tied to the drawing layout, concrete is placed and vibrated to eliminate voids, and the footing cures on the engineer's schedule before wall forming begins.

  4. Wall forming, pour, and strip

    Walls are formed straight and plumb, rebar is tied through the height, utility embeds are positioned, concrete is poured and consolidated, and forms are stripped once the concrete reaches strength.

Protection before backfill

Waterproofing and Drainage Complete the Installation

A new concrete slab is porous until it cures fully, and groundwater will find its way through any crack or joint. Foundation waterproofing applied to the exterior wall before backfill stops water at the source.

Weeping tile at the footing level collects groundwater and channels it away from the structure. Both are installed as part of the foundation installation, not as an afterthought. Skipping them means a wet basement by spring. Done right during the pour, they protect the structure for its entire life. The same principle applies to the basement slab inside the foundation.

Start your foundation
reinforced footings ready for pour at a Detroit foundation install
To spec Every pour
Waterproofed Before backfill
Free Written quote

Common questions

Foundation Installation Questions Answered

Drawings, footings, additions and waterproofing handoff for new foundations in Detroit.

Yes. Every new foundation install is built to the structural engineer's drawings, footing sizes, wall thicknesses, rebar layouts, mix designs, and is ready for inspection at each stage before concrete is ordered or backfill goes in.
Yes. Additions usually require the new foundation to tie in or isolate from the existing footing per the engineer's design, so the new structure settles with the house rather than against it. We pour to that detail.
Below the frost line, which is typically several feet in Detroit, and confirmed against the engineer's geotechnical info. The exact depth depends on the soil, the load and the local code requirements; the drawings specify it.
Yes, as part of installation. Foundation waterproofing and weeping tile go on before backfill, protecting the new structure from groundwater for the long haul.
It depends on the size, the soil, the engineering and access. We put exact numbers in a written, itemised quote after reviewing the drawings and walking the site, so the price is firm against the actual project.

Homeowner reviews

What Detroit Homeowners Say About Their New Foundations

★★★★★ 4.9 · 87 reviews on Google
Read all reviews →
★★★★★

Foundation for a full custom build, footings and walls to the engineer's drawings, inspected at every stage. Project went smooth and the structure has not moved through the first winter.

H. T.
Detroit
★★★★★

Addition foundation tied into the existing house exactly as the engineer specified. New and old settled together, no separation at the join.

I. L.
Sterling Heights
★★★★★

Below frost depth, properly reinforced, with the waterproofing on before backfill. They explained every step before pouring.

D. X.
Dearborn
★★★★★

Embeds for plumbing and electrical placed exactly where the trades needed them. Made the rest of the build smooth and avoided drilling into a new foundation.

A. L.
Ann Arbor

Ready to build

Request Your Free Foundation Installation Quote

Share the engineer's drawings or describe your project, and we will provide a detailed estimate for the slab, walls, reinforcement, waterproofing and timeline aligned with your build schedule.

We review drawings and send a written foundation quote within one business day.